Off-cut remover Hektor 2
Separates milled PCBs carefully and fast
Hektor separates milled PCBs carefully and fast. The offcut material is removed smoothly and precisely. The matrix consists of two parts. This ensures easy and cost-saving change of the blades. Compressed air is used for the separation process.
The operating pressure can be set on the machine. When the foot switch is pressed, the off-cut is punched out. The off-cuts are collected in the collecting box. When the gate is opened the waste material can be extracted.
PCB separator MAESTRO 2 / 2M
Fast and efficient for PCBs with pre-scored groove
MAESTRO 2 separates small amount and prototype series of PCBs fast and economically. The compact and stable aluminum frame requires only a minimum of space.
MAESTRO 2 is the reasonable model to start with, suitable for smaller numbers of PCBs. The PCB is fed manually between the circular blades and is thereby separated.
PCB separator MAESTRO 3E
MAESTRO 3E separates both small and large pre-scored PCBs. The table and the rest can be continuously adjusted to the most suitable working position. The slit between the linear blade and the rest can be adjusted to ensure that the side strips fall through and are sorted out. The PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB. The clearance between the upper guide and the linear blade is adustable to ensure that the PCB is only separated in the pre-scored groove.
PCB separator MAESTRO 4S
The MAESTRO 4S separates both large and small PCBs quickly, economically and without stress. Cutting with only a single traverse of the pre-scored groove causes tensile and compressive stresses that can damage sensitive components near the groove. Even a second traverse of the groove accompanied by an adjustment of the blade distance substantially reduces the tensile and compressive stresses. This significantly improves the quality of the populated PCBs.
- The blade distance is entered on the operating panel and its adjustment is motor-powered.
- Up to nine programs can be stored.
- The materials used for PCBs are FR4 and aluminum
- The continuously adjustable separation length is set with limit switches.
- The accumulated cutting performance is displayed for the purpose of scheduling preventive maintenance of the blade
PCB separator MAESTRO 5L
When large numbers of pre-scored PCBs need to be separated.
MAESTRO 5L with base frame is used most economically whenever large numbers of pre-scored PCBs need to be separated. The well-arranged control panel ensures easy operation. Machine with base frame - adjustable in height for optimal modification of each application.
PCB panels with maximum width of 310 mm can be separated by up to 11 pairs of circular blades simultaneously. Configuration of the blades is adjusted to your individual PCB also the cover and the guide.
Sensors are used to monitor the separating process. The PCBs are placed either by hand or they feed automatically by a loading station. The machine can also be installed in an assembling line. The SMEMA interface is the standard connection for use.
PCB Magazines Series 100 / 180 / 300
Can be filled when standing vertical or laying horizontal.
The cab PCB magazines can be filled when standing vertical or laying horizontal. The system is totally adjustable for width and can be assembled according to your individual requirements. For different size PCBs we offer PCB magazines with a height of 100, 180 and 300 mm.
All magazines have 32 slots, each with a 10 mm clearance between them, thereby providing maximum use of available space.
The precision molded slots are funnel shaped at each end to simplify the insertion of each circuit board. The location of each mounting slot is shown by yellow and white positioning strips. These enable boards to be loaded while avoiding the risk of being loaded by hand in the wrong position.
PCB Magazines Series 600 / 700 / 800
For automated assembly lines.
Precision, stability and flexible handling are important features for the use of the PCB Magazines in automated
The stable and robust frame construction guarantees a long lasting use of the cab magazine in your production. The rack walls are manufactured from conductive material.
Series 600 - Width adjustment by screw clamp. The series 600 is cost effective alternative with a simple width adjustment. By backing off the four screw clamps the moveable rack wall can be pushed to the necessary PCB width.
Series 700 - Width adjustment by gear belt. Handling different PCB sizes the magazines have to be adjusted to the PCB width quite often. The PCB Magazines of the series 700 are adjusted to the necessary PCB width within seconds.
Series 800 - Full automatic width adjustment. Increase process safety and optimize your production process by the automatic width adjustment of the cab magazines in un-loaders. On request.